Models
KCP K
Covers 8 models with following unique features:
Shaft seal 35,445 length ,one coupling bore 22 one Dimensions for
end of suction face
to center line of discharge 102 mm. one shaft height 135mm,
one spacer coupling100 mm
one packing size 8mmMax. BKW 23/2900 RPM.
Models KCP M
Covers 10 models with following unique features:
Shaft seal 45mm, 445 length ,one length 615 up to 6” suction size.
Coupling bore 32mm
& 42 mm, flange face to center of casing 102 & 150 Max. BKW
70/2900 RPM discharge.
Models KCP G
Covers 8 models , shafts seal sizes 55.0 & 65.0
,coupling bore 48 & 60.0
Range of application:
General : Pharmaceutical ,Pollution control, Textile , food
condensate, return, sulfuric
acid circulation, Stack scrubbers, Filter press feed.
Chemicals: Caustics transfer, Acid unloading ,Monomer &
Polymer transfer & urea,
liquid ammonia & liquid nitrogen.
Primary Metals: Waste Acid recovery, Pickle liquor
circulation.
Petrochemical: Aromatics, NGL, LPG light & reflex tower
bottom, Hydrocarbon gas, oil.
Pulp & Paper: Digester make up, Black Liquor recovery,
white liquor , Coating slurries.
Special designed R/Led pumps for priming systems for effluent
neutralizing & disposal.
Range of temperature:
-200 Degree. C to 180 Degree. C
Range of pressure:
Q= 2 (M)3/H to 1800(M)3/H
Range of Flow:
Q= 2 (M)3/H to 1800(M)3/H
Design:
Features:
- Back pull out construction with
spacer couplings for rapid assembly &
dis- assembly on line.
- Fully open impeller with partial
shrouds.
Standard Dimensions/maximum pump & parts interchangeability.
- Low noise level due to fundamental
design restrictions on impeller &
volute cut water clearance.
- Impeller designed on finite
element rotational stresses analysis, to explore to give
a light sturdy Impeller .
- Heavy duty construction.
- External impeller adjustment.
- Hook type shaft sleeve.
- Normal or reinforced shaft &
bearings.
- Shaft Designed for overhung
concept having first critical speed of rotation ,
maximum deflection of shaft 0.05 mm at stuffing box face.
|
